- Порты: 24x 100BASE-X MT-RJ (MMF)
- Подключение к шине: Switch Fabric
- Форвардинг: Centralized (возможен апгрейд до Distributed с помошью установки дочерней карты WS-F6K-DFC)
WS-X6524-100FX-MM Features
Feature
|
Description
|
---|---|
Ports per module |
•24 ports. Ports are numbered 1 (left) to 24 (right). •1 port group •Port ranges per port group: 1-24 |
Port connector type |
MT-RJ |
Cabling distance |
1.24 mi (2 km) full-duplex; 1312 ft (400 m) half-duplex over MMF |
Buffer size |
1.2 MB per port |
QoS |
•Number of egress queues: 4 •Number of ingress queues: 2 •Number of thresholds per egress queue: 1 •Number of thresholds per ingress queue: 0 |
Maximum frame size |
Up to 9216 bytes per frame |
Module oversubscription rate |
N/A |
Supervisor engine support |
Supported by the following supervisor engines: •Supervisor Engine 2 •Supervisor Engine 32 •Supervisor Engine 32 PISA •Supervisor Engine 720 •Supervisor Engine 720-10GE |
Software support |
•With Supervisor Engine 2—12.1(8a)EX •With Supervisor Engine 32—12.2(18)SXF •With Supervisor Engine 32 PISA—12.2(18)ZY •With Supervisor Engine 720—12.2(14)SX •With Supervisor Engine 720-10GE—12.2(33)SXH •Catalyst OS—7.6(9) |
Queues per port |
•Tx—1p3q1t •Rx—1p1q0t |
Chassis/slot restrictions |
No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis. |
Bus connection |
Single connection into the 32-Gbps shared bus |
Module upgrades available |
|
PoE support |
Not available |
Distributed forwarding support |
Field upgradeable to support distributed forwarding with the following daughter cards: •WS-F6K-DFC •WS-F6K-DFC3A •WS-F6K-DFC3B •WS-F6K-DFC3BXL See Appendix A for further information on the DFC daughter cards. See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note for field installation procedures. |
Pluggable transceivers support |
Not supported |
Digital Optical Monitoring (DOM) support |
Not supported |
Module front panel LEDs |
STATUS •Green—All diagnostics pass; the module is operational. •Orange—The module is booting or running diagnostics; an overtemperature condition has occurred. LINK •Green—The port is active (the link is connected and operational). •Flashing orange—The port failed diagnostics and is disabled. •Orange—The port is disabled. •Red—The module is resetting; an overtemperature condition has occurred. Note If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. •Off—The port is not active or the link is not connected. |
WS-X6524-100FX-MM Physical and Environmental Specifications
Item
|
Specification
|
---|---|
Dimensions |
1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. |
Weight |
Base module—7.0 lb (3.18 kg) |
Power and heat numbers |
•Base module –Module current—1.90 A –Module power—79.8 W –AC-input power—99.75 W –AC heat dissipation—340.65 BTU/hour –DC-input power—107.30 W –DC heat dissipation—366.30 BTU/hour •Base module + DFC3 daughter card –Module current—4.00 A –Module power—168.00 W –AC-input power—210.00 W –AC heat dissipation—717.15 BTU/hour –DC-input power—225.81 W –DC heat dissipation—771.13 BTU/hour •Base module + DFC3A daughter card –Module current—4.47 A –Module power—187.74 W –AC-input power—234.68 W –AC heat dissipation—801.42 BTU/hour –DC-input power—252.34 W –DC heat dissipation—861.74 BTU/hour |
Power and heat numbers |
•Base module + DFC3B daughter card –Module current—3.57 A –Module power—149.94 W –AC-input power—187.43 W –AC heat dissipation—640.06 BTU/hour –DC-input power—201.53 W –DC heat dissipation—688.23 BTU/hour •Base module + DFC3BXL daughter card –Module current—3.37 A –Module power—141.54 W –AC-input power—176.93 W –AC heat dissipation—604.20 BTU/hour –DC-input power—190.24 W –DC heat dissipation—649.68 BTU/hour |
Environment |
|
Operating temperature |
•Certified for operation: 32° to 104°F (0° to 40°C) •Designed and tested for operation: 32° to 130°F (0° to 55°C) |
Humidity (RH) ambient (noncondensing) |
10 to 90% |
Operating altitude |
•Certified for operation: 0 to 6500 ft (0 to 2000 m) •Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m) |