Маршрутизаторы Cisco NCS 6000 серии предлагают исключительную сеть маневренности, пакетную оптическую конвергенцию и petabit в секунду системы масштаба. Серия Cisco NCS 6000 также облегчает создание ядра следующего поколения для поддержки эластичной емкости при низкой совокупной стоимости владения и для доставки мобильных, видео и облачных сервисов с высокой пропускной способностью.
Использование ведущей в отрасли Cisco IOS ® операционной системы XR, работает в виртуальной среде, Cisco NCS 6000 Series продвигает концепцию распределенной маршрутизации и виртуализации. Используя виртуализованный Cisco IOS XR, Cisco NCS 6000 Series предлагает новые уровни программируемости и виртуализации для поддержки широкого спектра новых предложений, ускорения подготовки и повышения эффективности сети.
Технические характеристики маршрутизатор CiscoNCS-6008-SYS-S:
eature |
Description |
|
Software compatibility |
Cisco IOS XR Software Release 5.0 or later running in the Cisco nVisor environment |
|
Protocols |
● Cisco Discovery Protocol ● IPv4 and IPv6 addressing ● Internet Control Message Protocol (ICMP) ● Layer 3 routing protocols, including Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First Version 2 (OSPFv2), OSPFv3, and Intermediate System-to-Intermediate System (IS-IS) Protocol ● Multicast forwarding with support for source-based and shared distribution trees and the following protocols: ◦ Protocol Independent Multicast Sparse Mode (PIM-SM) ◦ Bi-directional PIM (Bidir-PIM) ◦ PIM Source Specific Multicast (PIM SSM) ◦ Automatic route processing (AutoRP) ◦ Internet Group Management Protocol (IGMP) versions, 2 and 3 ◦ Multiprotocol BGP (MBGP) ◦ Multicast Source Discovery Protocol (MSDP) ● Multiprotocol Label Switching (MPLS) ◦ MPLS Label Distribution Protocol (LDP) ◦ Resource Reservation Protocol (RSVP) ◦ Diffserv Aware Traffic Engineering (TE) ● MPLS Traffic Engineering control plane (RFCs 2702 and 2430) ● Segment Routing ● Route Policy Language (RPL) ● MPLS Traffic Engineering control plane ● Management: ◦ Simple Network Management Protocol (SNMP) ◦ Programmatic interfaces (XML) ◦ Model Driven Telemetry ◦ Netconf/Yang ● Security ◦ Message Digest Algorithm (MD5) ◦ IP Security (IPsec) Protocol ◦ Secure Shell Protocol Version 2 (SSHv2) ◦ Secure FTP (SFTP) ◦ Secure Sockets Layer (SSL) ● Ethernet ◦ 100 Gigabit Ethernet IEEE 802.3 ◦ 40 Gigabit Ethernet IEEE 802.3 ◦ 10 Gigabit Ethernet IEEE 802.3 ◦ Support for short- and long-reach IEEE standards |
|
Components |
Each Cisco NCS 6008 line card chassis includes: ● Standalone chassis (no rack required) ● 2 route processors ● 6 fabric cards ● 8 line card slots ● 2 fan trays ● Air inlet filter ● 6 power shelves (DC or AC) |
|
Fabric Cards |
● 6 Fabric cards support 5+1 redundancy ● System can sustain more than one fabric card failure ● Universal Fabric card (2T & 1T) OR Single-chassis Fabric Card (1T) ● Universal Fabric card OR Multi-chassis Fabric card (legacy option). 16 optical connections to the Cisco NCS 6000 Series Fabric Chassis |
|
Line cards |
100-G line cards ● 20 x 100 Gigabit Ethernet -multiservice cards with combo optics (CPAK & QSFP) ● 20 x 100 Gigabit Ethernet LSR cards with combo optics (CPAK & QSFP) ● 10 x 100 Gigabit Ethernet -multiservice cards with CPAK optics ● 10 x 100 Gigabit Ethernet LSR cards with CPAK optics 10-G line cards ● 60 x 10 - Gigabit Ethernet multiservice cards with Enhanced Small Form-Factor Pluggable (SFP+) optics ● 60 x 10 - Gigabit Ethernet LSR cards with Enhanced Small Form-Factor Pluggable (SFP+) optics |
|
Connectivity |
100 and 10 Gigabit Ethernet on 100-Gbps line cards using breakout or patch panel solutions |
|
Features and functions |
IP features: ● IPv4 unicast services ● IPv6 unicast services ● IPv4/IPv6 equal-cost multipathing (ECMP) ● IPv4/IPv6 load balancing) Forwarding features: ● Access control lists (ACLs) ● Qos and class of service (CoS) using modular QoS command-line interface (CLI; MQC) ● IP packet classification and marking ● Queuing (ingress and egress) ● Policing (ingress and egress) ● Diagnostic and network management support |
IPv4 multicast features: ● Multicast reverse path forwarding (RPF) ● Multicast nonstop forwarding (NSF) ● Multicast forwarding information base (MFIB) MPLS features: ● MPLS forwarding ● MPLS load balancing ● User network interface (UNI) ● Link management protocol (LMP) Security features: ● Control packet policing ● Dynamic control plane protection ● GTSM RFC 3682 (formerly BTSH) |
System capacity |
4 Tbps per line card capability (2 Tbps per slot ingress and 2 Tbps per slot egress) for a total switching capacity of 32 Tbps in a Single Chassis configuration Up to 1Pbps total switching capacity in a multi-chassis configuration |
|
Reliability and availability |
System redundancy: ● Power redundancy 1:1 or 1:N ● Fan tray redundancy 1:1 ● Route processor redundancy 1:1 ● Fabric card redundancy 1:6 Software features: ● NSF using graceful restart for IS-IS, OSPF, BGP, LDP, and RSVP ● Line-card online insertion and removal (OIR) support ● Fabric card OIR support ● Out of resource management ● Virtual machine redundancy ● MPLS Fast Reroute (FRR) ● Hot Standby Router Protocol (HSRP) and Virtual Router Redundancy ProtocolVRRP) |
|
MIBs |
SNMP framework support: ● SNMPv1 ● SNMPv2c ● SNMPv3 ● MIB II, including interface extensions (RFC 1213) ● SNMP-FRAMEWORK-MIB ● SNMP-TARGET-MIB ● SNMP-NOTIFICATION-MIB ● SNMP-USM-MIB ● SNMP-VACM-MIB System management: ● CISCO- BULK-FILE-MIB ● CISCO-CONFIG-COPY-MIB ● CISCO-CONFIG-MAN-MIB ● CISCO-FLASH-MIB ● CISCO-MEMORY-POOL-MIB ● Cisco FTP Client MIB ● Cisco Process MIB ● Cisco Syslog MIB ● CISCO-SYSTEM-MIB ● CISCO-CDP-MIB ● IF-MIB (RFC 2233/RFC 2863) QoS: ● MQC-MIB (Cisco Class-Based QoS MIB) ● CISCO-PING-MIB |
Chassis: ● ENTITY-MIB (RFC 2737) ● CISCO-entity-asset-MIB ● CISCO-entity-sensor-MIB ● CISCO-FRU-MIB (Cisco-Entity-FRU-Control-MIB) Fabric: ● CISCO-Fabric-Mcast-MIB ● CISCO-Fabric-Mcast-Appl-MIB Routing protocols: ● BGP4-MIB Version 1 ● OSPFv1-MIB (RFC 1253) ● CISCO-IETF-IP-FORWARDING-MIB ● IP-MIB (was RFC 2011-MIB) ● TCP-MIB (RFC 2012) ● UDP-MIB ● CISCO-HSRP-EXT-MIB ● CISCO-HSRP-MIB Traps: ● RFC 1157 ● Authentication ● Linkup ● Linkdown ● ColdstartWarmstart |
Network management |
Enhanced CLI XML interface Simple Network Management Protocol (SNMP) and MIB support Cisco Prime™ Network Netconf/Yang Model Driven Telemetry |
|
Programmatic interfaces |
XML schema support |
|
Physical dimensions |
Chassis height: ● 84 in. (213.36 cm) Chassis width: ● 23.6 in. (59.94 cm) Chassis depth: (inclusive of external cosmetic doors) ● 42 in. (106.68 cm) |
|
Power |
● Support for both DC and AC power modules[1] (AC ranges:200-240V; 50-60 Hz; 16A maximumWorldwide ranging DC (-40 to -72V; 50A nominal, and 60A maximum) |
|
Environmental conditions |
Storage temperature: -40 to 158°F (-40 to 70°C) Operating temperature: ● Normal: 41 to 104°F (5 to 40°C) ● Short term*: 23 to 122°F (-5 to 50°C) (see note) Relative humidity: ● Normal: 5 to 85% ● Short-term*: 5 to 90% but not to exceed 0.024 kg water per kg of dry air |