Модуль Cisco Catalyst WS-X6524-100FX-MM

Ports per module

•24 ports. Ports are numbered 1 (left) to 24 (right).

•1 port group

•Port ranges per port group: 1-24

Port connector type

MT-RJ

Cabling distance

1.24 mi (2 km) full-duplex; 1312 ft (400 m) half-duplex over MMF

Buffer size

1.2 MB per port

QoS

•Number of egress queues: 4

•Number of ingress queues: 2

•Number of thresholds per egress queue: 1

Maximum frame size

Up to 9216 bytes per frame

Module oversubscription rate

N/A

Supervisor engine support

Supported by the following supervisor engines:

•Supervisor Engine 2

•Supervisor Engine 32

•Supervisor Engine 32 PISA

•Supervisor Engine 720

•Supervisor Engine 720-10GE

Software support

•With Supervisor Engine 2—12.1(8a)EX

•With Supervisor Engine 32—12.2(18)SXF

•With Supervisor Engine 32 PISA—12.2(18)ZY

•With Supervisor Engine 720—12.2(14)SX

•With Supervisor Engine 720-10GE—12.2(33)SXH

•Catalyst OS—7.6(9)

Queues per port

•Tx—1p3q1t

•Rx—1p1q0t

Chassis/slot restrictions

No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis.

Bus connection

Single connection into the 32-Gbps shared bus

Module upgrades available

PoE support

Not available

Distributed forwarding support

Field upgradeable to support distributed forwarding with the following daughter cards:

•WS-F6K-DFC

•WS-F6K-DFC3A

•WS-F6K-DFC3B

•WS-F6K-DFC3BXL

See Appendix A for further information on the DFC daughter cards.

See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note for field installation procedures.

Pluggable transceivers support

Not supported

Digital Optical Monitoring (DOM) support

Not supported

Module front panel LEDs

STATUS

•Green—All diagnostics pass; the module is operational.

•Orange—The module is booting or running diagnostics; an overtemperature condition has occurred.

LINK

•Green—The port is active (the link is connected and operational).

•Flashing orange—The port failed diagnostics and is disabled.

•Orange—The port is disabled.

•Red—The module is resetting; an overtemperature condition has occurred.

Note If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online.

•Off—The port is not active or the link is not connected.

Dimensions

1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.

Weight

Base module—7.0 lb (3.18 kg)

Power and heat numbers

•Base module

–Module current—1.90 A

–Module power—79.8 W

–AC-input power—99.75 W

–AC heat dissipation—340.65 BTU/hour

–DC-input power—107.30 W

–DC heat dissipation—366.30 BTU/hour

•Base module + DFC3 daughter card

–Module current—4.00 A

–Module power—168.00 W

–AC-input power—210.00 W

–AC heat dissipation—717.15 BTU/hour

–DC-input power—225.81 W

–DC heat dissipation—771.13 BTU/hour

•Base module + DFC3A daughter card

–Module current—4.47 A

–Module power—187.74 W

–AC-input power—234.68 W

–AC heat dissipation—801.42 BTU/hour

–DC-input power—252.34 W

–DC heat dissipation—861.74 BTU/hour

Power and heat numbers 
(continued)

•Base module + DFC3B daughter card

–Module current—3.57 A

–Module power—149.94 W

–AC-input power—187.43 W

–AC heat dissipation—640.06 BTU/hour

–DC-input power—201.53 W

–DC heat dissipation—688.23 BTU/hour

•Base module + DFC3BXL daughter card

–Module current—3.37 A

–Module power—141.54 W

–AC-input power—176.93 W

–AC heat dissipation—604.20 BTU/hour

–DC-input power—190.24 W

–DC heat dissipation—649.68 BTU/hour

Environment

Operating temperature

•Certified for operation: 32° to 104°F (0° to 40°C)

•Designed and tested for operation: 32° to 130°F (0° to 55°C)

Humidity (RH) ambient (noncondensing)

10 to 90%

Operating altitude

•Certified for operation: 0 to 6500 ft (0 to 2000 m)

•Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)