Сделать заявку
Если сомневаетесь в выборе заполните заявку в свободной форме
Оформить Модуль Cisco Catalyst WS-SUP720-3BXL в Белгороде
/ каталог продукции
Наши цены ниже средних по рынку
Отгрузки из-за рубежа в день оплаты
Мы доступны для онлайн- переговоров
Все наземные ТК Доставка в аэропорт
Cisco ® Catalyst ® 6500/Cisco 7600 Series Supervisor Engine 720 это семейство управляющих модулей предназначенных для масштабируемой производительности и имеющих богатый аппаратный функционал IP. Данный функционал включает в себя такие приложения как традиционный IP форвардинг, L2-L3 MPLS, VPN, EoMPLS, а так же функционал QoS и безопасности. Sup720 объединяет в себе высокопроизводительную 720Gbps коммутационную кросс-матрицу с процесоором форвардинга на одном модуле, что позволило достичь скорости коммутирования 40Gbps на слот (включая 4-х портовые 10GE и 48-ми портовые 10/100/1000BASE-T интерфейсные модули). С аппаратным форвардингом IPv4, IPv6 и MPLS, производительность системы способна достичь 400Mpps для IPv4, 200Mpps для IPv6, включая функционал и 1024 VRF каждый из которых содержит 700 маршрутов/VRF для MPLS.
Безопасность системы усилена таким функционалом как Port Security, CPU rate limiting, Multi-Path uRPF и поддержкой long list 802.1x extension. Расширенный функционал включает в себя поддержку QoS механизмов, аппаратную поддержку GRE туннелирования, а поддержка ACL поможет построить высокоскоростные сети с богатым функционалом, будь то сеть предприятия, узел агрегации или пограничные сети. С расширенным функционалом безопасности, QoS и масштабируемой производительностью Sup720 идеален для ядра сетей предприятий и ЦОДов. Управляющий модуль спроектирован на зарекомендовавшей себя архитектуре Cisco Express Forwarding (CEF) с поддержкой централизованного форвардинга (CEF) и распределённого форвардинга (dCEF). Разные варианты устанавливаемых дочерних плат PFC3 определяют возможности конкретной модели модуля Sup720. Всего их три, PFC3A, PFC3B and PFC3BXL. Соответствующие им модели WS-SUP720, WS-SUP720-3B and WS-SUP720-3BXL. Семейство Sup720 поддерживается на обеих ветках ОС - Cisco Catalyst OS ® и Cisco IOS ®.
Основные особенности:
- Расширяемая производительность форвардинга: до 400Mpps IPv4 и 200Mpps IPv6 c dCEF
- Аппаратная поддержка MPLS: использование VPN и L2 туннелирования при управлении трафиком для QoS
- До 40Gbps ёмкость коммутации на слот, 720Gbps агрегированная пропускная способность модуля
- Поддержка интерфейсов 1GE и 10GE
- Защита инвестиций: поддержка всех поколений интерфейсных, сервисных и WAN модулей Catalyst 6500
- Увеличение плотности портов и конфигураций сервисных модулей в пределах шасси
Q. What are some of the key features/benefits of the Supervisor 720?
A. The following are some of the key features and benefits of the Supervisor 720.
• Slot-efficiency and increased port density via the Supervisor 720's Integrated 720 Gbps Switch Fabric
• Advanced IP services for simplified management, greater operational control, higher performance using Intelligent Networks Services enable by Supervisor 720 hardware such as: Encapsulated Remote SPAN (ERSPAN), MPLS/VPN (HW), IPv6 (HW), GRE (HW), NAT (HW), Egress Policing, Multicast VPN, VRF Select/Explicit Routing.
• 400 Mpps system throughput using a 720 Gbps switch fabric-increasing Gigabit and 10 Gigabit aggregation capabilities
• Investment Protection backward compatible with all existing LAN, WAN interface and multigigabit services modules
Q. Will the Supervisor 720 be supported in all Cisco Catalyst 6500 Series chassis?
A. Yes. In the case of E-series chassis no fan upgrade is required. E-Chassis Fan tray is sufficient. In the case of non E-series chassis please follow the Table 2 for fan upgrade.
Note: In order for the Supervisor 720 to operate in all Cisco Catalyst 65xx chassis as well as Cisco 7603, 7606, 7613 and OSR-7609 require an upgraded system fan tray to support the additional cooling requirements for these modules. The following table outlines the requirements for each chassis.
Fan Options for the Cisco Catalyst 6500/Cisco 7600 Series Internet Router
|
Chassis |
Original Fan |
Fan Upgrade |
|
6503/7603
|
WS-C6K-3SLOT-FAN2 |
|
|
6506
|
WS-C6K-6SLOT-FAN |
WS-C6K-6SLOT-FAN2 |
|
7606
|
TBD |
|
|
6509
|
WS-C6K-9SLOT-FAN |
WS-C6K-9SLOT-FAN2 |
|
6509-NEBS/OSR-7609
|
WS-C6509-NEB-FAN |
WS-C6509-NEB-FAN2 |
|
Cisco 7609
|
TBD |
|
|
6513/7613
|
WS-C6K-13SLOT-FAN |
WS-C6K-13SLT-FAN2 |
Q. Are there any other system upgrades required in order to use the new Supervisor 720?
A. In addition to upgrading the fan tray, you may also need to upgrade the power supply in order to properly power the system. The minimum is a 2500 watt power supply for 6, 9, and 13-slot chassis. The 2500W power supply can operate as a 1300(W) (110VAC) or a 2500W (220VAC, -48DC to -60DC). As with any chassis configuration, power requirements for a Supervisor 720-based system will depend on the configuration. Consult the Hardware Installation documentation on CCO for more specific power requirements.
Q. What are the key components that make up a Supervisor 720?
A. The Supervisor 720 incorporates a new version of the Policy Feature Card (PFC3A or PFC3B or PFC3BXL) as well as a new Multilayer Switch Feature Card (MSFC3) as well as an integrated 720 Gbps switch fabric. This level of integration increases slot efficiency of high performance and high availability configurations, by 1 slot and 2 slots in a Cisco Catalyst 6500 Series chassis, respectively.
Q. Can a Supervisor 720 be ordered without the MSFC or the PFC?
A. No, the MSFC and PFC are an integral part of a Supervisor 720.
Q. Do I still need a separate Switch Fabric Module (SFM)?
A. No, the new Supervisor Engine 720 integrates a 720 Gbps Switch Fabric on board providing for increased slot efficiencies.
Q. Does the current SFM and SFM2 work in the same chassis where a Supervisor Engine 720 is installed?
A. No, since the switch fabric is integrated, the use of the SFM would be superfluous.
Q. Can I support a classic (32 Gb bus) card, an 8 Gb fabric (CEF256) card and a new high performance 40 Gb fabric (dCEF720) card at the same time in the same chassis with a Supervisor Engine 720?
A. Yes. One of the primary objectives when designing the new Supervisor Engine 720 was Investment Protection. The Supervisor Engine 720 will support all previous generations of interface modules.
Q. What are the performance characteristics for a Cisco Catalyst 6500 system configured with the Supervisor 720?
A. The new Supervisor 720 has an integrated switch fabric providing two 20 Gb connection to each module slot. This enables performance up to 400 Mpps distributed CEF.
Summary Performance Matrix
|
System Configuation with Supervisor 720 |
Maximum Throughput (Mpps) |
Bandwidth (Gbps) |
|
All Classic Series Modules
|
Up to 15 Mpps (per system) |
16 Gbps (shared) |
|
All CEF256 Modules
|
Up to 30 Mpps (per system) |
8 Gbps (dedicated per slot) |
|
Mix of Classic and CEF256 Series Modules
|
Up to 15 Mpps (per system) |
Classic-16 Gbps (shared) CEF25-8 Gbps (dedicated per slot) |
|
CEF256 Modules + DFC3
|
Up to 15 Mpps (per slot) |
8 Gbps (dedicated per slot) |
|
dCEF256 Modules
|
Up to 24 Mpps (per slot) |
2 x 8 Gbps (dedicated per slot) |
|
dCEF720 Modules
|
Up to 48 Mpps (per slot) |
2x 20 Gbps (dedicated per slot) |
Q. Will the Supervisor 720 have more TCAM resources?
A. ACL TCAM, QoS TCAM, ACL labels, LOUs, and L4ops per ACL are all the same in Supervisor Engine 720 as they are in Sup2.
Q. Will the Supervisor 720 support High Availability?
A. The Cisco Catalyst 6500 Series offers the highest levels of High Availability (HA) in the industry. The introduction of the Supervisor Engine 720 continues to support previous HA features such as RPR Failover, Full HW Redundancy, Hot-Swap Supervisors, Hot-Swap PSUs, Hot-Swap Modules, Multi Module EtherChannel, MISTP, PSU Load Balancing, HSRP, PortFast, UplinkFast, Backbone, Fast EtherChannel resiliency, 802.1w/802.1s, PAgP, L2 Load Balancing (PVST+), and L3 Load Balancing (Equal cost routing). At introduction, using Cisco IOS version 12.2(14)SX, the supervisor 720 will also support 255 HSRP groups, VRRP and Gateway Load Balancing Protocol. Additionally, the Supervisor 720 also supports NSF/SSO.
Q. Does the Supervisor 720 support all existing Cisco Catalyst 6500 series interface and services module, protecting customer investments?
A. Yes. The supervisor 720's integrated 720 Gbps switch fabric features auto-detect, auto-negotiation capabilities that connect to a module's required speed: 32 Gbps, 256 Gbps or 720 Gbps.
Q. What is the forwarding performance of a Cisco Catalyst 6500 Series configured with the Supervisor Engine 720 and all of the interface modules are dCEF720 fabric-enabled components?
A. ~ 400 Mpps sustained performance
Q. Will adding a Supervisor 720 increase the performance of my existing interface modules?
A. No, the Supervisor Engine 720 does not make any existing line cards go faster. Existing line cards will be able to take advantage of other Supervisor Engine 720 features, but not bandwidth. The switch fabric auto-negotiates with each linecard to match its connection requirement: classic 32 Gbps shared bus, 256 Gbps or 720 Gbps.
Q. What is the centralized forwarding performance of a 6509 with a Supervisor Engine 720 and all fabric-enabled (CEF256) components with no DFCs?
A. 30 Mpps.
Q. What slots can the Supervisor Engine 720 be installed in on the various chassis?
A. Because the switch fabric is integrated with the supervisor, the Supervisor Engine 720 must be installed in particular slots in the 3-, 6-, 9-, and 13-slot chassis. See Table 3 for slot requirements.
Supervisor Engine 720 Slot Requirements
|
Chassis |
Slots for Supervisor Engine 720 |
|
6503/6503-E/7603
|
1 or 2 |
|
6506/6506-E/7606
|
5 or 6 |
|
6509/6509-E
|
5 or 6 |
|
6509-NEBS/6509-NEBS-A/OSR-7609
|
5 or 6 |
|
Cisco 7609
|
5 or 6 |
|
6513/7613
|
7 or 8 |
Q. What is the connection speed for slots in a 6513?
A. When a Supervisor Engine 720 is installed in a 6513, it provides one 20 Gb connection in slots 1-8 and two 20 Gb (40 Gbps) connections to slots 9-13.
Q. Will the introduction of a classic card in a Supervisor Engine 720 configured Cisco Catalyst 6500 Series system reduce the centralized forwarding performance to 15 Mpps?
A. Performance is not limited to centralized forwarding, (for example, those modules that connect directly to the 256 Gbps or 720 Gbps switch fabric) distributed CEF256 or dCEF720 modules have the ability to communicate via the fabric and are not completely reliant upon the Central Bus.
Q. Will there be an upgrade program from SUP1A or SUP2s?
A. Cisco TMP program is always available Please contact your account team for details.
Q. What will be the NVRAM size on the Supervisor 720?
A. The new Supervisor 720 will have 512 KB on the Switch Processor and 2 MB on the Route Processor.
Q. Does the Supervisor Engine 720 support flash memory for software, configuration and crash dump purposes?
A. Yes, the Supervisor Engine 720 supports two Compact Flash Type II cards.
Q. Does the Supervisor Engine 720 support the IBM compact flash microdrive?
A. Yes, the Supervisor Engine 720 will support the IBM 1 Gb microdrive in slot 1.
Q. Does the Supervisor Engine 720 have any uplink ports?
A. Yes, the Supervisor Engine 720 has three physical uplink ports, 2 x GE ports using modular Small Formfactor Plugable (SFP) ports and 1 x 10/100/1000Tx port. Only two of the three ports can be active at any one point in time.
Q. What software options are available for the Supervisor Engine 720?
A. The Supervisor Engine 720 supports Cisco IOS starting 12.2(14)SX and Cisco Catalyst OS starting 8.1.
Q. Is AppleTalk supported on the Supervisor Engine 720?
A. Yes. Only in software on the MSFC3.
Q. Will you support IPX on the new Supervisor 720?
A. Yes, IPX will be supported in software only on the new Supervisor 720. If you require performance-based IPX support, you should consider a Supervisor 2 with running Cisco Catalyst OS or in Hybrid mode.
Q. Can I use a Supervisor Engine 720 with a WS-X6816-GBIC card?
A. Yes, but you must first upgrade the on-board DFC to a new DFC3 using the part number WS-F6K-DFC3A.
Q. Are there any compatibility issues between the Supervisor Engine 720 and Fabric-enabled (CEF256) line cards?
A. The only stipulation is that a line card with the current generation DFC must be upgraded to the new DFC3 to work with the Supervisor Engine 720.
Уважаемые покупатели! Размещенная на данном сайте справочная информация о товарах не является офертой, наличие и стоимость оборудования необходимо уточнить у менеджеров, которые с удовольствием помогут Вам в выборе оборудования и оформлении заказа.
Модуль Cisco Catalyst WS-SUP720-3BXL
Артикул: WS-SUP720-3BXL