Сделать заявку
Если сомневаетесь в выборе заполните заявку в свободной форме
Оформить
Наши цены ниже средних по рынку Отгрузки из-за рубежа в день оплаты Мы доступны для онлайн- переговоров Все наземные ТК Доставка в аэропорт
Артикул: JW817A
Точка доступа Aruba (HPE) JW817A
1 695.00 $ 163 482,75 P
-
+
товар в корзине, оформить?

Точки доступа Aruba (HPE) обеспечивают быструю и стабильную беспроводную передачу данных в корпоративной сети. Aruba предлагает как простые устройства для предоставления базового функционала сети Wi-Fi, так и для сетей с высокой плотностью пользователей и скоростями до 2 Гбит/с, а также защищенные модели для работы в сложных климатических условиях.

Точки доступа просты в инсталляции, могут работать одновременно в диапазонах 2,4 и 5 ГГц, используют технологию MIMO для увеличения скорости передачи данных и поддерживают стандарт 802.11ac Wave2.

Instant-точки доступа Aruba — не требуют отдельного контроллера, а используют виртуальный контроллер, функции которого выполняет одна из точек. HPE Aruba Instant — это решение, которое позволяет развернуть «бесконтроллерную» сеть WiFi корпоративного уровня. В него уже встроена сетевая безопасность, автоматическое управление RF и достаточно интеллектуальных функций для запуска полноценного решения без дополнительного лицензирования. Управляется кластер из точек доступа при помощи виртуального контроллера, который размещается на одной из точек доступа (IAP). Контроллер отвечает за процесс автоконфигурирования новых точек доступа, авторизацию и аутентификацию, гостевой доступ и сетевые сервисы (NAT, DHCP и др.). 

Технические характеристики точки доступа Aruba (HPE) JW817A: 

UNIQUE BENEFITS

  • Dual Radio 802.11ac access point with Multi-User MIMO
    • Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 600 Mbps in the 2.4 GHz band (with 4SS/HT40 clients)
  • Antenna polarization diversity for optimized RF performance
    • Each 5 GHz radio chain has a switch and two antennas
    • Software controlled; Horizontally and vertically polarized
  • HPE Smart Rate uplink port that scales up to 5Gbps
    • Supports up to 5Gbps with NBase-T Ethernet compatibility
    • Backwards compatible with 100/1000Base-T
    • Adds support for hitless PoE failover between the HPE Smart Rate port and the secondary 1000Base-T port when both ports are powered
  • Support for additional 5 GHz bands
    • Supports software upgrade to enable additional 5 GHz spectrum when governments expand available frequencies
  • Built-in Bluetooth Low-Energy (BLE) radio
    • Enables location based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time
  • Advanced Cellular Coexistence (ACC)
    • Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment
  • Quality of service for app visibility and control
    • Supports priority handling and policy enforcement for unified communication apps, including Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing
    • Aruba AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 1,500 enterprise apps or groups of apps
  • RF Management
    • Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs
    • The Aruba 330 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available
  • Spectrum analysis
    • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference from HT20 through VHT160 operation
  • Security
    • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
    • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
    • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
    • SecureJack-capable for secure tunneling of wiredEthernet traffic
  • Intelligent Power Monitoring (IPM)
    • Enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities based on the amount of power available to the unit
    • Software configurable to disable capabilities in certain orders. For the 330 Series APs, by default, the USB interface will be the first feature to turn off if the AP power consumption exceeds the available power budget

 

CHOOSE YOUR OPERATING MODE

  • The Aruba 330 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.
  • Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 330 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.
  • Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows the 330 Series Instant APs to become part of a WLAN that is managed by a Mobility Controller.
  • Remote AP (RAP) for branch deployments
  • Air monitor (AM) for wireless IDS, rogue detection and containment
  • Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
  • Secure enterprise mesh
  • For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, the Instant APs are factory-shipped to any site and configure themselves when powered up.

 

SPECIFICATIONS

  • AP-334 (controller-managed) and IAP-334 (Instant):
    • 802.11ac – 5 GHz 4x4 MIMO (1,733 Mbps max rate) and 2.4 GHz 4x4 MIMO (600 Mbps max rate) radios, with a total of four dual-band RP-SMA connectors for external antennas
  • AP-335 (controller-managed) and IAP-335 (Instant):
    • 802.11ac – 5 GHz 4x4 MIMO (1,733 Mbps max rate) and 2.4 GHz 4x4 MIMO (600 Mbps max rate) radios, with a total of twelve integrated omni-directional downtilt antennas

 

WI-FI RADIO SPECIFICATIONS

  • AP type: Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 4x4 MIMOSoftware-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
    • In addition to 802.11n, the 2.4 GHz radio supports all 802.11ac features as well (proprietary extension)
  • 5 GHz:
    • Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices
    • Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
  • 2.4 GHz:Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
    • Four spatial stream Single User (SU) MIMO for up to 600 Mbps wireless data rate to individual 4x4 HT40 client devices
  • Supported frequency bands (country-specific restrictions apply):Available channels: Dependent on configured regulatory domain
    • 2.400 to 2.4835 GHz
    • 5.150 to 5.250 GHz
    • 5.250 to 5.350 GHz
    • 5.470 to 5.725 GHz
    • 5.725 to 5.850 GHz
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:Transmit power: Configurable in increments of 0.5 dBm
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):Maximum ratio combining (MRC) for improved receiver performance
    • 2.4 GHz band: +24 dBm (18 dBm per chain)
    • 5 GHz band: +24 dBm (18 dBm per chain)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20 MHz, 40 MHz, 80 MHz and 160 MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
  • Supported data rates (Mbps):802.11n high-throughput (HT) support: HT 20/40
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 600 (MCS0 to MCS31)
    • 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
  • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
  •  

 

WI-FI ANTENNAS

  • AP-334/IAP-334:
    • Four RP-SMA connectors for external dual band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 2.3 dB in 2.4 GHz and 1.2 dB in 5 GHz.
  • AP-335/IAP-335
    • Four (vertically polarized) integrated 2.4 GHz downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 3.8 dBi per antenna.
    • Each 5 GHz radio chain has both a vertically and a horizontally polarized antenna element; AP software automatically and dynamically selects the best set of elements for each data packet transmitted or received.
    • Four integrated vertically polarized 5 GHz downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 4.9 dBi per antenna.
    • Four integrated horizontally polarized 5 GHz downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 5.7 dBi per antenna.
    • Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
    • The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 1.6 dBi in 2.4 GHz and 2.5 dBi in 5 GHz.

 

OTHER INTERFACES

  • One HPE Smart Rate port (RJ-45, maximum negotiated speed 5 Gbps)
    • Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE) - PoE-PD: 48 Vdc (nominal) 802.3at PoE
  • One 10/100/1000BASE-T Ethernet network interface (RJ-45)DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • PoE-PD: 48 Vdc (nominal) 802.3at PoE
  • USB 2.0 host interface (Type A connector)
  • Bluetooth Low Energy (BLE) radioVisual indicators (tri-color LEDs): For system and radio status
    • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
    • Integrated antenna with roughly 30 degrees downtilt and peak gain of 5.1 dBi (AP-334/IAP-334) or 2.2 dBi (AP-335/IAP-335)
  • Reset button: Factory reset (during device power up)
  • Serial console interface (RJ-45, RS232)
  • Kensington security slot

 

POWER SOURCES AND CONSUMPTION

  • The AP supports direct DC power and Power over Ethernet (PoE)
  • When both power sources are available, DC power takes priority over PoE
  • Power sources are sold separately
  • Direct DC source: 48Vdc nominal, +/- 5%
    • Interface accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
  • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
    • When using IPM, the AP may enter power-save mode with reduced functionality when powered by a PoE source (see details on Intelligent Power Monitoring in this datasheet)
    • Without IPM the AP will apply some fixed restrictions when using PoE:
    • The USB interface is disabled when using an 802.3at PoE power source
    • The USB interface and second Ethernet port are disabled, and both radios operate in 1x1 mode when using an 802.3af POE power source
  • Maximum (worst-case) power consumption: 25.3W (802.3at PoE), 13.2W (802.3af PoE) or 25W (DC)Maximum (worst-case) power consumption in idle mode: 10.9W (PoE or DC)
    • Excludes power consumed by external USB device (and internal overhead); this could add up to 5.9W (PoE or DC) for a 5W/1A USB device

 

MOUNTING

  • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
  • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details

 

MECHANICAL

  • Dimensions/weight (unit, excluding mount accessories):
    • 225 mm (W) x 224 mm (D) x 52 mm (H), 8.9” (W) x 8.9” (D) x 2.0” (H)
    • 1150g/41oz
  • Dimensions/weight (shipping):
    • 335 mm (W) x 290 mm (D) x 85 mm (H), 13.2” (W) x 11.4” (D) x 3.35” (H)
    • 1750g/62oz

 

ENVIRONMENTAL

  • Operating:
    • Temperature: 0° C to +50° C (+32° F to +122° F)
    • Humidity: 5% to 93% non-condensing
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)

 

REGULATORY

  • FCC/Industry of Canada
  • CE Marked
  • R&TTE Directive 1995/5/EC
  • Low Voltage Directive 72/23/EEC
  • EN 300 328
  • EN 301 489
  • EN 301 893
  • UL/IEC/EN 60950
  • EN 60601-1-1 and EN 60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

 

RELIABILITY

MTBF: 531,662hrs (61yrs) at +25C operating temperature

 

REGULATORY MODEL NUMBERS

  • AP-334 and IAP-334: APIN0334
  • AP-335 and IAP-335: APIN0335

 

CERTIFICATIONS

  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+

 

WARRANTY

Aruba limited lifetime warranty

 

MINIMUM SOFTWARE VERSIONS

  • ArubaOS 6.5.0.0
  • Aruba InstantOS 4.3.0.0

 

Уважаемые покупатели! Размещенная на данном сайте справочная информация о товарах не является офертой, наличие и стоимость оборудования необходимо уточнить у менеджеров, которые с удовольствием помогут Вам в выборе оборудования и оформлении заказа.
Точка доступа Aruba (HPE) JW817A
Артикул: JW817A
товар в корзине, оформить?
Цена:
1 695.00 $ 163 482,75 P
Доставка во все регионы РФ
Обратный звонок

Нажимая кнопку «Отправить», вы подтверждаете свое согласие на обработку персональных данных
Сделать заявку
Оставьте Ваш телефон или электронную почту для связи!

Нажимая кнопку «Отправить», вы подтверждаете свое согласие на обработку персональных данных

Отправить письмо

Нажимая кнопку «Отправить», вы подтверждаете свое согласие на обработку персональных данных

Сообщить о поступлении

Нажимая кнопку «Отправить», вы подтверждаете свое согласие на обработку персональных данных
Запросить прайс-лист

Нажимая кнопку «Запросить», вы подтверждаете свое согласие на обработку персональных данных

Компания ООО «100 Гигабит» предоставляет три вида гарантийного обслуживания:

1. Новое оборудование. Мы транслируем гарантию производителя покупателю. Если, например, гарантийный срок на новое оборудование составляет 1 год, то действовать он начинает в момент приобретения оборудования нашим покупателем. В случае наступления гарантийного случая, обращения осуществляются в нашу компанию, либо в авторизованный сервисный центр производителя.

2. Оборудование бывшее в употреблении (used). На такое оборудование мы предоставляем свою корпоративную гарантию сроком на 3 месяца.

Note: Всё б/у оборудование перед продажей проходит тестирование, и поставляется без оригинальных аксессуаров, документации и фабричной упаковки.

3. Расширенная гарантия на любые типы оборудования. Данная услуга рассчитана прежде всего на б/у оборудование, когда вы можете приобрести гарантию на срок 12 месяцев за 10% к цене приобретаемого оборудования. Также мы можем предложить вам любые виды расширенной гарантии на новое оборудование, предлагаемые производителем.

Выберите Ваш регион:
Федеральный