Модуль Cisco Catalyst WS-X6148-45AF

Ports per module

•48 ports (all variants). Ports are numbered (left to right):

–Top row, odd numbered ports 1-47.

–Bottom row, even numbered ports 2-48.

•Port groups:

–WS-X6148-RJ-45—2

–WS-X6148A-RJ-45—6

•Port ranges per port group:

–WS-X6148-RJ-45: 1-24, 25-48

–WS-X6148A-RJ-45: 1-8, 8-16, 17-24, 25-32, 33-40, 41-48

Port connector type

RJ-45 (all variants)

Cabling distance

328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (all variants)

Buffer size

•WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V—1 MB per 8 ports

•WS-X6148A-RJ-45 and WS-X6148A-45AF—5.3 MB per 8 ports

QoS

•Number of egress queues: 2 (6148), 4 (6148A)

•Number of ingress queues: 1 (6148), 2 (6148A)

•Number of thresholds per egress queue: 2 (6148), 8 (6148A)

•Number of thresholds per ingress queue: 4 (6148), 4 (6148A)

Maximum frame size

•WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V—Up to 8092 bytes per frame

•WS-X6148A-RJ-45 and WS-X6148A-45AF—Up to 9216 bytes per frame

Module oversubscription rate

1.2:1

Supervisor engine support

Supported on the following supervisor engines:

•Supervisor Engine 2

•Supervisor Engine 32

•Supervisor Engine 32 PISA

•Supervisor Engine 720

•Supervisor Engine 720-10GE

•Supervisor Engine 2T (only supported with the WS-X6148A-RJ-45 and the WS-X6148A-45AF Ethernet modules)

Software support

•With Supervisor Engine 2—12.1(12c)E1

•With Supervisor Engine 32—12.2(18)SXF

•With Supervisor Engine 32 PISA—12.2(18)ZY

•With Supervisor Engine 720—12.2(18)SXF (6148A)

•With Supervisor Engine 720 except with WS-F6K-48-AF PoE daughter card—12.2(14)SX (6148)

•With Supervisor Engine 720 and WS-F6K-48-AF PoE daughter card—12.2(17d)SXB (6148)

•With Supervisor Engine 720-10GE—12.2(33)SXH

•With Supervisor Engine 2T—12.2(50)SY

•Catalyst OS (6148A)—8.4(1)

•Catalyst OS (6148)—6.4(11) (for software release 6.x); 7.6(9) (for software release 7.x)

Queues per port

•WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V

–Tx—1p2q2t per 8 ports

–Rx—1p2t per port

•WS-X6148A-RJ-45 and WS-X6148A-45AF

–Tx—1p3q8t

–Rx—1q2t

Chassis/slot restrictions

No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis (all variants).

Bus connection

Single connection into the 32-Gbps shared bus (all variants)

Module upgrades available

PoE support

•WS-X6148-RJ-45—Field upgradeable to the Cisco prestandard only with the WS-F6K-VPWR-GE= daughter card or both the Cisco prestandard and the IEEE 802.3af standard by installing the WS-F6K-GE48-AF= daughter card.

•WS-X6148A-RJ-45—Field upgradeable to the Cisco prestandard and the IEEE 802.3af standard by installing the WS-F6K-GE48-AF= daughter card.

See the Cisco Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note for field upgrade procedures.

See Appendix A for further information on the PoE daughter cards.

Distributed forwarding support

Not supported.

Pluggable transceivers support

Not supported.

TDR support

Yes

Module front panel LEDs

STATUS

•Green—All diagnostics pass; the module is operational.

•Orange—The module is booting or running diagnostics.

An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.)

•Red—The module is resetting. The switch has just been powered on or the module has been hot inserted during the normal initialization sequence.

An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.)

If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online.

LINK

•Green—The port is active (the link is connected and operational).

•Orange—The module or port is disabled through the CLI command or the module is initializing.

•Flashing orange—The port is faulty and has been disabled.

•Off—The port is not active or the link is not connected.

PHONE

•Green—The PoE daughter card is installed and detected.

•Off—The PoE daughter card is not detected or is not installed.

Dimensions (H x W x D)

1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.

Weight

•WS-X6148-RJ-45 (Base module)—6.8 lb (3.08 kg)

•WS-X6148A-RJ-45 (Enhanced base module)—7.2 lb (3.27 kg)

Power and heat numbers

•WS-X6148-RJ-45

–Module current—2.39 A

–Module power—100.38 W

–AC-input power—125.48 W

–AC heat dissipation—428.50 BTU/hour

–DC-input power—134.92 W

–DC heat dissipation—460.75 BTU/hour

•WS-X6148-45AF (base module + PoE daughter card)

–Module current—2.57 A

–Module power—107.94 W

–AC-input power—134.33 W

–AC heat dissipation—460.77 BTU/hour

–DC-input power—145.08 W

–DC heat dissipation—495.45 BTU/hour

•WS-X6148-RJ45V (base module + PoE daughter card)

–Module current—2.81 A

–Module power—118.02 W

–AC-input power—147.53 W

–AC heat dissipation—503.80 BTU/hour

–DC-input power—158.63 W

–DC heat dissipation—541.72 BTU/hour

Power and heat numbers

(continued)

•WS-X6148A-RJ-45

–Module current—1.00 A

–Module power—42.00 W

–AC-input power—52.50 W

–AC heat dissipation—179.29 BTU/hour

–DC-input power—55.45 W

–DC heat dissipation—192.78 BTU/hour

•WS-X6148A-RJ45AF (enhanced base module + PoE daughter card)

–Module current—1.42 A

–Module power—59.64 W

–AC-input power—74.55 W

–AC heat dissipation—254.59 BTU/hour

–DC-input power—80.16 W

–DC heat dissipation—273.75 BTU/hour

Environment

Operating temperature

•Certified for operation: 32° to 104°F (0° to 40°C)

•Designed and tested for operation: 32° to 130°F (0° to 55°C)

Humidity (RH) ambient (noncondensing)

10 to 90%

Operating altitude

•Certified for operation: 0 to 6500 ft (0 to 2000 m)

•Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)